FABTECH 2027

FABTECH is North America's largest metal forming, fabricating, welding and finishing trade show, rotating between Chicago, Las Vegas, Orlando and other US cities. Manufacturers, fabricators and equipment buyers attend.

Official site

Checked October 29, 2026

Reported attendance

41,795

attendees · 2025

Reported exhibitors

1,702 exhibitors · 2025

How these are counted ↓

About FABTECH 2027

FABTECH is North America's largest metal forming, fabricating, welding and finishing event, as the organizer describes it. It's a trade show for job shops, OEMs, engineers and plant managers who buy sheet metal equipment. The next edition runs 13 to 16 September 2027 in Chicago at McCormick Place. The 2026 edition ran 21 to 23 October at the Las Vegas Convention Center. The 2025 Chicago edition counted 41,795 attendees and 1,702 exhibitors.

Source: fabtechexpo.com

What happens at FABTECH 2027

FABTECH is a buying show with a conference attached. The official 2027 floor plan spreads it across three McCormick Place buildings. The North Building holds Welding, AI for Manufacturing, Automation, and Forming and Fabricating. The Lakeside Center holds Finishing, Stamping and Press Automation, Tube and Pipe, and the Job Shop area. The South Building holds Forming and Fabricating plus Roll Forming.

The organizer hasn't published the 2027 conference program yet. At the 2026 edition, the conference listed 180+ expert-led sessions in 12 tracks. Tracks covered automation, lasers, job shop operations, stamping, management and workforce development. The AWS welding track and the IFCA finishing track were priced separately. Keynotes and panels were free for all attendees in the FABTECH Theater.

Side events in 2026 included the Women of FABTECH breakfast, the Emerging Leaders Program for professionals under 35 and the Metal Artist Collective. A new Artificial Intelligence for Manufacturing (AIM) Pavilion debuted in Las Vegas in 2026. The 2027 plan places AI for Manufacturing in the North Building.

What's new for FABTECH 2027

FABTECH moves back to Chicago for 2027, on 13 to 16 September. The 2027 floor plan gives AI for Manufacturing a place in the North Building, next to Welding and Automation. The AI pavilion debuted in 2026, when dozens of AI sessions ran through the schedule. The organizer hasn't announced other 2027 changes yet. FABTECH Mexico runs in Monterrey on 4 to 6 May 2027, and FABTECH Canada in Toronto on 13 to 15 June 2028.

Who attends FABTECH

FABTECH draws owners, executives and engineers from metal fabrication shops and manufacturers. The 2025 post-event report counted 41,795 attendees in Chicago, based on audience survey and registration data. Owners, company management and corporate executives made up 25% of the audience. Manufacturing and design engineers were 19%, and sales and marketing staff were 15%.

Attendees by job function
  • Owner, Company Mgmt/Corporate Executive25%
  • Manufacturing Engineering, Design Engineer19%
  • Sales & Marketing15%
  • Other Job Functions10%
  • Manufacturing Production10%
  • Foreman/Leader/Supervisor8%
  • Welder/Machine Operator4%
  • Distributor3%
  • Product Design and R&D3%
  • Purchasing3%

FABTECH 2025 Chicago, 2025 audience survey and registration data2025 · fabtechexpo.com ↗

Attendees by type of company
  • Job Shop/Contract Manufacturer47%
  • Other18%
  • OEM15%
  • Supplier9%
  • Dealer/Distributor6%
  • Non-Manufacturer5%

FABTECH 2025 Chicago, 2025 audience survey and registration data2025 · fabtechexpo.com ↗

Attendees by company size (employees)
  • Less than 2027%
  • 20 to 4917%
  • 50 to 9915%
  • 100 to 24918%
  • 250 to 4999%
  • 500 to 9995%
  • 1,000 or more9%

FABTECH 2025 Chicago, 2025 audience survey and registration data2025 · fabtechexpo.com ↗

Attendees by equipment budget
  • Up to $50,00031%
  • $50,001 to $200,00019%
  • $200,001 to $500,00014%
  • $500,001 to $1,000,00014%
  • $1,000,001 to $5,000,00016%
  • Over $5,000,0008%

FABTECH 2025 Chicago, buying power section of the post event report2025 · fabtechexpo.com ↗

Exhibitors by booth number prefix
  • S booths800
  • C booths431
  • N booths222

Our count of the official FABTECH 2026 exhibitor list, 20 October 2026. A company with booths under two prefixes counts under each.2026 · s36.a2zinc.net ↗

Job shops and contract manufacturers were 47% of attending companies in 2025. OEMs were 15% and suppliers 9%. Smaller firms make up much of the audience. Companies with fewer than 20 employees were 27% of the audience, and those with 1,000 or more were 9%.

The same report says 81% of attendees influence or approve equipment purchases. It also says 52% had equipment budgets above $200,000. Half the 2025 audience were first-time visitors, and 9% came from outside the U.S. The organizer's 2026 audience profile for Las Vegas listed the same top ten industries, from aerospace and agriculture to oil and gas. It hasn't published final attendance for the 2026 Las Vegas edition yet.

Attendance and exhibitors by year

As the organizer reports them. What's counted varies between events, so compare with care.

Reported attendance
30,000
41,795
20242025
Reported exhibitors
1,500
1,702
20242025
EditionAttendanceExhibitors
2025

41,795attendance, FABTECH 2025 at McCormick Place, Chicago (post event report final stats)The organizer's 18 September 2025 release rounded this to 42,000 industry participants.fabtechexpo.com ↗

1,702 exhibitorsfabtechexpo.com ↗

2024

30,000industry professionals at FABTECH 2024, Orange County Convention Center, Orlandofabtechexpo.com ↗

1,500 exhibitorsfabtechexpo.com ↗

Companies exhibiting, sponsoring and attending FABTECH

The official 2027 exhibitor list named two companies on 29 October 2026, by our count. They're AMADA AMERICA at booth A1203 and Panasonic Connect at B13051. Most names below come from the 2026 Las Vegas show, where laser, press brake, welding and robot makers led. TRUMPF, BLM Group and Mitsubishi Laser were the 2026 Platinum Sponsors.

Sponsors (19)TRUMPF, BLM Group, Mitsubishi Laser (MC Machinery Systems) and 16 more
Exhibitors (21)Panasonic Connect, AMADA AMERICA, Lincoln Electric and 18 more
Attending (10)Boeing, Caterpillar, John Deere and 7 more

On the buyer side, the organizer's 2025 report lists top attending companies. They include defense, aerospace, automotive and equipment makers. Booth numbers for 2026 come from the official 2026 exhibitor list, checked 20 October 2026.

Exhibitors at FABTECH 2027

FABTECH 2027 is taking booth requests now, with a 2027 floor plan for McCormick Place. The official 2027 exhibitor list named two companies on 29 October 2026, by our count. FABTECH 2026 in Las Vegas had more than 1,400 exhibitors, according to the organizer. In 2025, Chicago had 1,702 exhibitors on 889,905 square feet.

To exhibit, companies request space through the exhibit page and work with a sales representative. Booth rates and the prospectus sit behind a request form, so prices aren't public. The organizer reports 202,191 leads collected at FABTECH 2025 in Chicago, an average of 119 per exhibitor.

Exhibitors register booth staff and order lead retrieval through exhibitor resources. Compare options in our guide to lead retrieval apps. For 2026, the exhibitor manual covered Freeman services, shipping and machinery rules.

Our count of the official 2026 exhibitor list found 1,448 exhibitor names on 20 October 2026. Booths numbered S accounted for 800 of them, C for 431 and N for 222. In the 2025 exhibitor survey, 66% were satisfied with the value of exhibiting. 61% would recommend FABTECH to a colleague.

Sponsors and partners at FABTECH 2027

FABTECH hasn't named its 2027 sponsors yet. In 2026 it had three Platinum Sponsors and 16 further sponsors on the organizer site. The platinum tier was BLM Group, Mitsubishi Laser and TRUMPF. Other 2026 sponsors included Acumatica, Amerisure, Bystronic, CNA Insurance, ESAB, FANUC and Genius ERP. Leader's Edge, Mazak, Modula, Nationwide, QAD Redzone, SMC, Transparency Analytics, UPG and Visual Components completed the list.

The sponsorship page lists prices, checked in October 2026. Digital signage costs $7,500. Conference track and panel discussion sponsorships cost $7,250 each. Retargeting costs $7,000, and lounge and food area prices vary. For tools that manage these deals, see event sponsorship software.

Five associations own the show. They're AWS, FMA, IFCA, PMA and SME. IFCA was formerly the Chemical Coaters Association International.

The event's tech

We couldn't identify a third-party registration platform on the event's website.

Which platforms run B2B event registration →

FABTECH attendee list, exhibitor list and sponsor list

The official FABTECH 2027 exhibitor list is live and adds companies with booth numbers as they book. The 2026 exhibitor directory still shows the Las Vegas lineup. Past exhibitor lists and show directories back to 2019 are in the FABTECH archive. Sponsors appear by tier at the foot of the organizer home page.

There's no public attendee list. The organizer warns that it doesn’t sell or rent exhibitor or attendee information to outside companies. It says many vendors falsely claim to have FABTECH attendee lists. Exhibitors can rent a pre-registered attendee mailing list from show management for pre-show mail.

Our guide explains how to find who’s attending an event. You can also compare event intelligence platforms.

See who's attending FABTECH

Organizers don't publish attendee lists. These event intelligence platforms show which companies and roles are likely to attend and help you book meetings. How to find who's attending

Speakers at FABTECH 2027

FABTECH hasn't announced its 2027 speakers yet. The keynotes page still shows the 2026 lineup. At the 2026 edition, three keynotes ran in the FABTECH Theater. Amber Mac opened on 21 October with The New AI Power Shift. Jerry Rice spoke on 22 October about championship culture in manufacturing. Steve Darnell of Welder Up closed on 23 October with a talk on craftsmanship and grit.

FABTECH hasn't announced its 2027 speakers yet. Below is who spoke at past editions.

Vanessa Heim, President and CEO of Brenco Industries, keynoted Women of FABTECH 2026. 2026 panels featured SendCutSend CEO Jim Belosic and speakers from Ferret Inc., Nationwide and KBKG. The official 2026 speaker list named 277 conference speakers. They included engineers from FANUC, Lincoln Electric, TRUMPF, IPG Photonics, Honda and the Air Force Research Laboratory.

Who spoke at FABTECH 2026 (48)

Dates, venue and getting there

FABTECH 2027 runs Monday 13 to Thursday 16 September 2027 in Chicago, per the organizer. The 2027 floor plan places it at McCormick Place, across the North, South and Lakeside Center buildings. A Sky Bridge and the Grand Concourse link the buildings. The organizer hasn't published 2027 show hours yet.

onPeak is the only official hotel provider for FABTECH 2027. International visitors can find visa guidance on the organizer site.

The 2026 edition ran 21 to 23 October at the Las Vegas Convention Center. It used the North, Central and South Halls.

FABTECH 2027 building plan, McCormick PlaceSimplified, not to scale. Based on the official plan ↗
Lakeside Center, Hall D (Finishing, Stamping and Press Automation, Tube and Pipe, Job Shop) · Lakeside Center (Hall D). Finishing, Stamping and Press Automation, Tube and Pipe, Job ShopNorth Building, Halls B1 and B2, Level 3 (Welding) · North Building. Welding, AI for Manufacturing, Automation, Forming and FabricatingNorth Building, Halls C1 and C2, Level 1 (Forming and Fabricating) · North Building. Welding, AI for Manufacturing, Automation, Forming and FabricatingSouth Building, Halls A1 and A2 (Forming and Fabricating, Roll Forming) · South Building (Halls A1 and A2). Forming and Fabricating, Roll FormingGrand Concourse, Level 2.5 · Grand Concourse and Sky BridgeDB1 and B2C1 and C2A1 and A2Martin Luther King Jr. DriveLake Shore Drive
  • Lakeside Center (Hall D). Finishing, Stamping and Press Automation, Tube and Pipe, Job Shop
  • North Building. Welding, AI for Manufacturing, Automation, Forming and Fabricating
  • South Building (Halls A1 and A2). Forming and Fabricating, Roll Forming
  • Grand Concourse and Sky Bridge

Pavilions by building as shown on the official 2027 overview. Halls B1 and B2 hold Welding, and Halls C1 and C2 hold Forming and Fabricating.

FABTECH tickets and registration

The organizer hasn't published 2027 registration dates or prices yet. FABTECH is a trade event for industry professionals only, and no one under 16 is admitted.

For 2026, show floor admission was free for anyone who registered by 16 October 2026. After that and onsite, the fee was $50. Conference prices for 2026 were on the conference page. Individual sessions cost $220, workshops $600 and a full conference package $900. The all-access rate was $1,300, or $1,200 before 11 September.

History of FABTECH

FABTECH debuted in Cleveland in 1981 with 161 exhibitors. It moved to Chicago in 1983. The AWS Welding Show joined in 2005 and METALFORM in 2008. CCAI, now IFCA, became a partner in 2010. Las Vegas first hosted FABTECH in 2008, and Orlando first hosted it in 2024.

The organizer says FABTECH 2024 drew 30,000 professionals and 1,500 exhibitors in Orlando. FABTECH 2025 in Chicago had the largest show floor in its history. Trade Show Executive reported 42,000 attendees and 1,700+ exhibitors, citing the organizer's release. The final post-event report gives 41,795 attendees.

The 2026 edition was the show's first return to Las Vegas in a decade. The FABTECH series also runs in Mexico and Canada. Similar 2027 shows include Blechexpo 2027 and BLECH India 2027.

Frequently asked questions

When is FABTECH 2027?
FABTECH 2027 runs 13 to 16 September 2027 in Chicago, per the organizer. It's at McCormick Place. The 2026 edition ran 21 to 23 October in Las Vegas.
Where is FABTECH held?
FABTECH takes place in Chicago, United States, at McCormick Place. It's held every year.
How many people attend FABTECH?
The 2025 post-event report counted 41,795 attendees in Chicago. The organizer hasn't published final figures for the 2026 Las Vegas edition yet. It had expected 31,000+ attendees there.
How many exhibitors are at FABTECH?
The organizer reported 1,702 exhibitors for the 2025 edition.
Who organizes FABTECH?
FABTECH is organized by AWS, FMA, IFCA, PMA and SME.
What is FABTECH?
FABTECH is North America's largest metal forming, fabricating, welding and finishing event, as the organizer describes it. Exhibitors show lasers, press brakes, welding, robots and finishing systems. A conference with 180+ sessions ran alongside in 2026.
How many people attended FABTECH 2024?
FABTECH 2024 in Orlando drew 30,000 industry professionals from all 50 states and 70 countries. It had 1,500 exhibitors, the organizer says.
Who attends FABTECH?
Owners and executives were 25% of the 2025 audience, and engineers 19%, per the post-event report. Job shops and contract manufacturers made up 47% of attending companies. 81% influence or approve equipment purchases.
Is FABTECH open to the public?
No. FABTECH is a trade event open only to industry professionals. No one under 16 is admitted, including infants in arms.
How much are FABTECH 2027 tickets?
The organizer hasn't published 2027 prices yet. In 2026, show floor admission was free if you registered by 16 October 2026, and $50 after that. Conference sessions started at $220, and the all-access rate was $1,300.
Where can I find the FABTECH 2027 exhibitor list?
The official FABTECH 2027 exhibitor list is live and fills as companies book booths. The 2026 directory lists more than 1,400 Las Vegas exhibitors. Past lists are in the FABTECH archive.
Can I buy the FABTECH attendee list?
No. The organizer says it doesn’t sell or rent attendee information to outside companies. It warns that vendors claiming to have FABTECH attendee lists are making false claims.
Who sponsors FABTECH 2027?
FABTECH hasn't named its 2027 sponsors yet. BLM Group, Mitsubishi Laser and TRUMPF were the 2026 Platinum Sponsors. Sixteen more 2026 sponsors included Bystronic, ESAB, FANUC and Mazak.
Who owns FABTECH?
Five associations own FABTECH. They're AWS, FMA, IFCA, PMA and SME. SME's Tracy Garcia is FABTECH group director, according to the 2025 recap release.
Where is FABTECH 2027?
FABTECH 2027 is at McCormick Place in Chicago on 13 to 16 September 2027. The organizer says the U.S. show rotates between Las Vegas, Chicago and Orlando.